The WR32 Series High-Capacity Carted Wheel Rake has a high under frame clearance and an increased distance between the transport wheels and raking wheels, measured at 39 in. (99.06 cm) and 18 in. (45.72 cm) respectively. This clearance allows for a high volume of crop to flow through the rake, reducing crop plugging while increasing productivity.

When raised, the wing design allows the release of the crop to uniformly finish the windrow.

The 60-in. (152.4-cm) diameter raking wheels turn slower, compared to the smaller competitive 55” raking wheel, when traveling at the same ground speed. This reduction in revolutions minimizes crop leaf loss and cleaner windrows, leading operators to produce higher quality hay. A larger diameter wheel will have a longer wear life, increasing the life of the raking tines.

The WR32 Series High-Capacity Carted Wheel Rake has three easy adjustment points to fine-tune windrows, enabling more hay to be gathered for each bale, in a range of conditions.

Rake Width Adjustment

Each rake angle can be independently adjusted to improve performance in a variety of raking conditions. By keeping the front raking width adjustment no wider than the crop, wheels roll easier over the ground and minimize rake wear.

Windrow Width Adjustments

Reduce the number of passes in the field by fine-tuning the windrow width to match your baler, Windrow Width Adjustments are available on both the WR3210 and WR3212 High-Capacity Carted Wheel Rakes.

Adjustable Rake Wheel Down Pressure

Improve accuracy on uneven terrain, gather more hay, and the prevent rake wheels from digging with the Rake Wheel Down Pressure adjustments on the WR32 Series High-Capacity Carted Wheel Rake. Turning the rod collar to increase or decrease the number of threads showing adjusts the wheel rake down pressure up or down.

The WR32 Series High-Capacity Carted Wheel Rake has compression springs on each side of the linkage system that will absorb the rake wheel shock for smooth travel over the ground.